MikroTik L23UGSR-5HaxD2HaxD, 802.11a/g/n/ac/ax, GbE, SFP, USB, 4xMMCX, L4

MikroTik L23UGSR-5HaxD2HaxD MikroTik L23UGSR-5HaxD2HaxD is a powerful board for AP/CPE/PtP installation with 2.4 GHz/ 5 GHz Wi-Fi 6 (802.11ax). The device is equipped with four MMCX connectors. You can add an HGO-OUT antenna and you have a great omnidirectional Access Point or an mANT30 PA antenna to create a powerful PtP connection over long distances. It has a modern Qualcomm Maple processor based on ARM architecture, 256 MB of RAM, a USB port for additional storage or other needs, a Gigabit Ethernet port with PoE (Power over Ethernet) support, a 2.5Gb SFP port for optical connection and a free miniPCIe slot that allows for further customization. For example, you can add an LTE modem for backup mobile internet - there is a NanoSIM slot on the bottom of the board. Information about the RouterOS MikroTik system If you are starting with RouterOS MikroTik or need advice on more complex settings, you can use our support. You can learn how to set up and manage your RouterBoard at our training courses. Setup tips and frequently asked questions can be found in the Technical Support section. All RouterBoards have the same RouterOS MikroTik system. All devices with RouterOS MikroTik fully support IPv6, have a firewall, Queues, NAT and with an L4 license support the CAPsMAN server. MikroTik can be set up via the web interface, via a mobile application, or with the winbox program, which can be downloaded from mikrotik.com. MikroTik has a "Quick Set" option for quick setup. There are several preset profiles to choose from. BASIC SPECIFICATIONS CPU frequency: 800 MHz Number of cores: 2 RAM memory: 256 MB Ports: 1× 1GbE RJ-45 LAN, 1× 2.5G SFP port, 1× MiniPCIe slot (for LTE, LoRA cards), 1× NanoSIM slot, 4× MMCX, 1× USB 2.0 PoE support: yes Standard: IEEE 802.11a/b/g/n/ac/ax Frequency band: 2.4 GHz, 5 GHz Dimensions: 113.8 × 107.4 × 26.6 mm Useful links and videos: Declaration of conformity + user manual Device setup via Quick Set quick guide Mobile phone control application Device reset, reset button function MikroTik RouterOS system recovery via Netinstall utility Address translation settings (NAT) Load Balancing settings (distribution of traffic between multiple Internet connections) Failover settings (switching the line to the backup in case of outage) Multiple uplinks using PCC & Load balancing Static NAT & RouterOS MikroTips: Netinstall