PLANET FGSD-1008HPS
PoE switch with 2 SFP ports 1000Base-X (shared with ports 9 and 10), 8 RJ-45 ports 10/100Base-TX with the ability to power other IEEE 802.3af/at devices and a total power output of 125 W.
VLAN 802.1q, TCP/UDP/DSCP/IP filter, STP/RSTP/MSTP, IGMPv3, port mirroring, ESD protection , Web/SNMP v1/v2c/v3 management, cybersecurity (SSH, SSL), intelligent PoE (PD alive check, PoE schedule, etc.), ACL, GVRP , IPv6 management.
Extend mode for connection at 10Mb/s up to a distance of 200 m on UTP depending on the cable used, including PoE power supply.
It is an 8-port 10/100Mbit Fast Ethernet switch with two Gigabit TP/SFP interfaces. It allows you to power other devices such as IP cameras, VoIP phones and desktop switches. The Gigabit interfaces provide additional options for expandability, flexibility and network integration.
The basic functions are mainly the ability to set port speeds, port aggregation into groups, VLAN, use of the Spanning tree protocol, QoS and IGMP snooping. It is also possible to use VLAN network definitions based on IEEE 802.1Q.
BASIC SPECIFICATIONS
Physical properties:
Ports: 8 x RJ-45 10/100BASE-TX, 2 x RJ-45 10/100/1000BASE-T, 2 x SFP 1000BASE-X
Memory: 16k MAC addresses, 4 Mb buffer
Throughput: 5.6 Gbps bus, operational 4.16 Mpps (64 bits)
Transmission support: 1522 B
Design: rackmount 1U
Power supply: internal AC 100 - 240 V, 50/60Hz, total power consumption up to 150 W
Protection: ESD up to 8 kV
Operating temperature: 0 - 50 °C, humidity up to 95%
Dimensions: 330 x 155 x 43.5 mm
Weight: 1500g
Administration functions:
Management: Web, SNMP v1, v2c, v3
QoS traffic prioritization: assigning each port a low or high priority
VLAN support:
- IEEE 802.1Q
- up to 10 VLAN groups, up to 4094 VLAN IDs
- Port-based VLAN, up to 10 VLAN groups
- GVRP, Voice VLAN
- VLAN Q-in-Q (bridging) with 802.1ad support
Spanning Tree Protocol:
- STP protocol, IEEE 802.1d Spanning Tree protocol
- RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
- RSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol
Port mirroring: RX, TX, RX+TX, many-to-one
Line aggregation: 4 ports in 2 groups for 10/100BASE-TX, 2 ports in 1 group for 10/100/1000BASE-T
IGMP multicast: IGMP v1/v2/v3
PoE function:
Total power output: 125 W, IEEE 802.3af, IEEE 802.3at
Number of injectors: 8 x up to 36 W
Power supply type: End-span
Advanced features:
Extended mode 10Mb/s with a range of up to 200 m
Intelligent PoE (PD alive check, PoE schedule, etc.)
Presentation
Manual
Other downloads
