PLANET XGS-6350-12X8TR
10 Gigabit L3 switch for professional network traffic management, 12x SFP+ 10G Base-X, 8x 10/100/1000 Base-T RJ-45 .
Hardware IP packet switching , high level of security, OSPF, RIP, VRRP , VLAN 802.1Q, STP/RSTP/MSTP, Multicast IGMP v3 and IPv6 MLD v1/v2 snooping, 802.3ad LACP duplication, QoS bandwidth.
Web/SNMPv3 management, Telnet, HTTPS, SSH, console, RADIUS and TACACS+ support, ACL filter, DHCP snooping, DoS and TCP protection, redundant AC 100-240 V power supply , rackmount 19"/1U.
As an additional feature, IP Stacking is available, which helps network administrators easily configure up to 8 switches of the same series using a single IP address. IP Stacking technology combines a number of switches to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local area network.
A distribution backbone switch for application in the most demanding data infrastructures, featuring advanced network algorithms and security features. With the possibility of connecting via a 10Gbit interface, it is designed for deployment in data centers, corporate companies, metropolitan networks, etc. Full throughput guarantees effective availability of the network or network resources for operations conducted or controlled through it.
The switch is an L3 router with support for RIP and OSFP protocols, has an advanced ACL (Access Control List) filter that allows you to control traffic based on MAC or IP address detection, TCP/UDP protocol, IP priority from traffic passing through the switch, and you can set up authentication of physical ports using the IEEE 802.1x RADIUS mechanism.
In general, you can define the bandwidth for each port with WRR support, modify DSCP and CoS values, and classify traffic based on pass-through port, VLAN, DSCP, IP preference, or ACL rules.
The device is managed via a WEB browser or via the SNMPv3 protocol with SSH security. For higher operational reliability, the device can be powered by two AC 100-240 V sources (redundant power supply).
BASIC SPECIFICATIONS
Physical properties:
Ports: 12x SFP+ 10G Base-SR/LR, 8x RJ-45 10/100/1000 Base-T, 1x RJ-45 (serial) console port
Memory: 32k MAC addresses, 3 MB buffer
Throughput: 256 Gbps bus, operational 180 Mpps (64B)
Transmission support: JumboFrame 9k
Design: 1U rack
Power supply: 2x internal AC 100-240 V (50-60 Hz) power supply, power consumption up to 55 W
Protection: no
Operating temperature: 0 to +60 °C
Dimensions: 442.5 x 315 x 44 mm
Weight: 4178g
Administration functions:
Management: console, Telnet, Web, SNMP SSH/SSL, 9 groups for RMON monitoring
Access Control: IP and MAC based ACL protocol
IP routing protocols: routing, RIP, OSPF, BGP, PBR, routing table 128 entries
ACL filter and bonding:
IP ACL, traffic filtering by IP address, protocol, port, TCP flags
MAC ACL, traffic filtering by MAC address, by VLAN ID and by combination of priority flags
Time ACL, traffic filtering by time
QoS traffic prioritization: 8 priority queues on all ports, Ingress shaper and Egress limiter
VLAN support:
IEEE 802.1Q
up to 4000 VLAN groups
Q-in-Q (VLAN stacking)
Private VLAN Edge (PVE)
Protocol-based VLAN
MAC-based VLAN
IP Subnet-based VLAN
Spanning Tree Protocol:
STP protocol, IEEE 802.1d Spanning Tree protocol
RSTP protocol, IEEE 802.1w Rapid Spanning Tree protocol
MSTP protocol, IEEE 802.1s Multiple Spanning Tree protocol
Port mirroring: RX, TX, both
Link aggregation: IEEE 802.3ad LACP, 8 ports in 32 groups
IP Multicast: IGMP v1/v2/v3, IGMP querier mode support, PIM-DM/SM
Authentication of connected devices: IEEE 802.1x (RADIUS), IP+MAC binding
DHCP Snooping: yes (blocking foreign DHCP servers)
LLDP: yes (automatic detection of the type of connected devices)
Wiring diagnostics: no
