Teltonika RUTX10
Powerful and reliable industrial Wi-Fi router that supports the 802.11ac standard. The router operates in dual-band 2.4 and 5 GHz and is equipped with a Bluetooth LE (low energy) module. It is an ideal solution for applications in small offices or the public sector that require high-speed data transfer and low latency.
RUTX10 is ideal for data transmission in automation projects based on SCADA systems, IoT, automated heating/cooling systems, electric vehicle charging stations, and more.
Advantages:
- Wave-2 802.11ac Dual-Band Wi-Fi with speeds up to 867 Mbps
- Bluetooth LE for short-range communication
- Remote access - Teltonika Remote Management System
- Quad-core ARM Cortex A7 CPU, 717 MHz
- Easy-to-use, secure RutOS operating system based on OpenWrt
- Support for VPN services
- Wide range of supply voltages for easier integration
Wireless part
- Wireless mode: IEEE 802.11ac (Wi-Fi 5), Dual Band, MU-MIMO, transmission up to 867 Mbps, AP and Station
- Encryption: WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
- ESSID (stealth mode) + wireless Hotspot
Ethernet part
- 1 x WAN port 10/100/1000 Mbps, configurable to LAN (auto MDI/MDIX)
- 3 x LAN port 10/100/1000 Mb/s (auto MDI/MDIX)
Network part
- Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
- Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL)
- VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers (allow proper routing of VoIP packets).
- Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP
- Firewall: defines rules for communication (port forwarding, traffic rules, etc.)
- DHCP: static and dynamic IP allocation
- Network backup: backup with recovery in case of connection or power failure (VRRP)
- QoS: control by priority, source/destination (planned), protocol, port or service (planned), WMM, 802.11e
- DDNS: support >25 service providers, others can be configured manually
- Hotspot: internal/external Radius server, customizable landing page
Security
- Authentication: Pre-shared key, digital certificates, X.509 certificates
- Firewall: Predefined firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack prevention: DDOS attack prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLAN: Port and VLAN tag separation
- WEB filter: blacklist for blocking unwanted websites, whitelist for specifying allowed websites
- Access Control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPN: support for multiple clients per server, 12 encryption methods
- OpenVPN encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
- IPsec: IKEv1 and IKEv2 with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
- GRE: GRE tunnel (Generic Encapsulation Protocol)
- PPTP, L2TP: client/server services can be run simultaneously
- Stunnel (planned): An encrypted network tunnel, mainly for programs that do not support SSL. It allows connecting two networks via an encrypted TCP tunnel, or securing the operation of unencrypted protocols or daemons such as IMAP, MySQL, POP, IRC, and others. It adds TLS encryption functionality to existing clients/servers without any code changes.
- DMVPN: Creating scalable IPsec VPN networks
Power supply
- 4pin DC, 9-50V
- passive PoE, not compatible with 802.3af/at
- consumption less than 11 W
More detailed information can be found in the attached manual, in the documents tab or on the page wiki.teltonika-networks.com/view/RUTX10 .
The RMS system can be tried for free at https://rms.teltonika.lt/ .
BASIC SPECIFICATIONS
Processor: ARM Cortex A7, 717 MHz, 4-core
Memory: 256MB DDR3 + 256MB SPI flash
Standard: IEEE 802.11ac
Data transfer rate: up to 867 Mbps
Ports: 4 x RJ-45, 1 x USB 2.0, 2 x RP-SMA (Wi-Fi), 1 x RP-SMA (Bluetooth), 1 x digital input, 1 x digital output (on power connector)
PoE support: yes, passive
Power supply: 9 - 50V
Dimensions: 115 x 95 x 32 mm
