MikroTik C53UiG+5HPaxD2HPaxD, hAP ax3, 4x GbE, 1x 2.5 GbE, 2.4+5GHz Wi-Fi 6, USB 3.0, USB, PSU. L4

MikroTik hAP ax3 MikroTik hAP ax3 is a top-of-the-line home Wi-Fi 6 access point AX (802.11ax + Wave 2) operating in the 2.4 and 5 GHz bands. This Wi-Fi router/AP has four GbE ports and one 2.5G port with PoE-in/out support. Two external antennas with a gain of 3.3 and 5.5 dBi ensure a stable wireless connection and optimal coverage. Another advantage is the ability to connect a USB drive or, for example, a 4G/LTE modem via a USB connector. The first port also supports passive PoE input/output, thanks to which the router can power other external devices (e.g. a wAP unit). The router also offers high performance in the form of a 4-core Qualcomm IPQ-6010 ARM processor operating at a frequency of 1.8 GHz, 1 GB of RAM and 128 MB of NAND memory. The router comes with the RouterOS v7 L6 operating system. The new generation of the perfect home Wi-Fi 6 access point. Wireless standard 802.11ax + Wave 2 support. 4x Gigabit Ethernet port + 1x 2.5G Ethernet port, Qualcomm IPQ-6010 ARM processor (1.8 GHz), 1 GB RAM, 128 MB NAND. The 802.11ax standard brings up to 40% higher speed performance in the 5 GHz band and up to 90% higher speed in the 2.4 GHz band! USB 3.0 can be useful for data storage purposes or backup connection using a 4G/LTE modem. The router/AP comes with a power supply and a bracket for wall mounting or horizontal/vertical placement. Comprehensive Firewall rules, WPA3, hardware IPsec encryption, Wireguard, BGP, advanced routing, multiple VPN tunnels for remote work, etc. RouterOS v7 - VPN, parental control, QoS (prioritizing traffic for certain needs - e.g. streaming), firewall, HW acceleration IPsec, VLAN, email or SMS notifications, automation of startup notifications, control + management of bandwidth usage and other functions. Information about the RouterOS MikroTik system If you are starting with RouterOS MikroTik or if you need advice on more complex settings, you can use our support. You will learn how to set up and manage the RouterBoard at our trainings. Don't know which model to choose? Check out this comparison table, where you will also find other information that will help you with your choice. All RouterBoards have the same RouterOS MikroTik system. All devices with RouterOS MikroTik fully support IPv6, have a firewall, Queues, NAT and with an L4 license support the CAPsMAN server. MikroTik can be set up via the web interface, via a mobile application, or with the winbox program, which can be downloaded from mikrotik.com. MikroTik has a "Quick Set" option, i.e. a quick setup option. There are several preset profiles to choose from. BASIC SPECIFICATIONS Standard: 802.11a/b/g/n/ac/ax + Wave2 support Frequency: 2.4 GHz, 5 GHz Interfaces (ports): 1x 2.5G RJ-45, 4x GbE RJ-45, 1x USB 3.0 PoE support: yes (passive PoE, 1x input/output, DC 18-28 V PoE in) Power supply: external DC 12-28 V adapter or PoE, consumption 15 W (up to 38 W at max. PoE output) Dimensions: 251 x 130 x 39 mm Slot with password for logging into administration: Useful links and videos: Declaration of conformity + user manual Device setup via Quick Set quick guide Mobile phone control application Device reset, reset button function MikroTik RouterOS system recovery via Netinstall utility Address translation (NAT) setup Load Balancing setup (distribution traffic between multiple internet connections) Failover settings (switching the line to the backup in case of an outage) Multiple uplinks using PCC & Load balancing Static NAT & RouterOS MikroTips: Netinstall