KOSUNPOWER KOS2500-24 2500 W
Pure sine wave voltage converter, has an integrated charger and USB output (with voltage 5 V, current 2.1 A) for charging various devices. The device also has a UPS function (automatic switching of the network and battery in case of a power failure). Modern and attractive design, high-quality workmanship, shock resistance and reliability of operation are the characteristic features of this product.
Compared to competing backup sources, it stands out with its fractional energy consumption - measured in laboratory conditions, the consumption was 22-24W , which significantly increases efficiency and reduces battery demands for long-term backups. Compared to commonly measured consumption values of comparable products, this is an energy saving of up to 80% .
This is a device designed to supply alternating current in places where there is no permanent mains power supply. The inverter is designed for use mainly in the wild, at a cottage or cottage, on a boat, in a caravan, in a truck, when traveling, etc. Thanks to the pure sine wave at the output, it can be used for various electrical appliances with regard to the required power input (W). The integrated 3-stage charger is designed for charging lead-acid (WET-flooded), maintenance and maintenance-free, gel, AGM, EFB batteries.
ATTENTION, the charger is not intended for charging Li-ion batteries (LiFePO4, etc.)
- High quality workmanship, long service life
- Using SMT chip technology and wave soldering
- Minimum own power consumption - 22-24W, savings compared to conventional UPS up to 80%
- Protection against overload, short circuit, reverse polarity, overheating (switches off at 70 °C)
- Compact dimensions, low weight
- Small and quiet fan, protecting against excessive heating
- Integrated 3-stage charger
- Car-like cigarette lighter/power socket
- USB port (voltage 5 V, current 2.1 A)
- UPS function (automatic switching between mains and battery in case of power failure)
Package contents:
- Backup source
- Power cable with Euro-connector
- Rubber feet with the option of screwing into the mounting plate
- Battery connection cables 1m with M8 eye
- Operating instructions
BASIC SPECIFICATIONS
Rated power: 2500 W
Peak power: 5000 W
Input voltage: DC 24V
Output voltage: AC 230 V / 50 Hz
Efficiency: 90%
Quiescent power consumption: 980 mA
Operating temperature: –10 to +60 °C
Dimensions: 460 × 220 × 90 mm
Weight: 8.25 kg
Color: black–green
