The blood pressure monitor measures current systole, diastole and pulse values on the brachial artery. Irregular heartbeat alert and blood pressure rating scale according to WHO recommendations will help you take better care of your health.
Simply place the iHealth Start blood pressure monitor on your upper arm and watch the automatic measurement progress on the easy-to-read display . Systolic and diastolic blood pressure values and the number of beats per minute are displayed immediately after the measurement and automatically saved in the device's memory.
Up to 4 users can measure and monitor blood pressure on one device. Each user profile has a memory for 30 measurements with date. For an approximate assessment, you can compare it with the World Health Organization scale. Consult your doctor about your results.
The values obtained from measurements on the Start automatic blood pressure monitor are comparable to the values obtained from measurements with a mechanical tonometer and stethoscope performed by a trained person.
The blood pressure monitor also displays the average for the last 7 days from measurements taken in the morning and evening (recommended time for measurements).
Summary of wrist blood pressure monitor features
Automatic upper arm blood pressure and pulse monitor
Displays systole, diastole and pulse values
Clinically tested
Possibility to set up to 4 profiles
For adult users only
Irregular heart rhythm detection
Blood pressure assessment indicator according to WHO (World Health Organization)
Medical device intended for home use
Consult your doctor before use, especially during pregnancy or if you have been diagnosed with arrhythmia or hardening of the arteries (atherosclerosis).
Oscillometric method of blood pressure measurement
Silicone pressure sensor
The measured blood pressure and pulse values are displayed on the LCD display.
The last 30 measurements of each user are stored with the date in the device's memory
The display also shows the average of each user's measured values
The blood pressure monitor meets electronic medical device certification
The monitor will automatically turn off after 1 minute of inactivity.
Wipe the cuff with a damp cloth.
Clean the display with a dry, soft cloth.
Tips for correct blood pressure measurement
Avoid excessive physical activity, stress, smoking, or eating or drinking for at least 30 minutes before the measurement . Remove tight clothing and accessories and sit with your legs flat on the floor (do not cross your legs). Rest your forearm on a table - the center of the cuff should be at the level of your heart. Do not talk and remain still during the measurement.
> Blood pressure naturally fluctuates throughout the day. The highest values usually occur during the daytime and the lowest around midnight. Consult your doctor for values measured at regular intervals.
Technical data
Simultaneous use of devices emitting electromagnetic waves may affect the measurement result.
Device dimensions 150 x 95 x 41 mm
Cuff circumference 22 – 30 cm
Weight 211 g (without batteries)
Oscillometric measurement method
Automatic cuff inflation and measurement
Memory 4 x 30 measurements
Power supply 4 x 1.5 V AAA batteries
Always replace all batteries at the same time.
Remove the batteries if you do not use the blood pressure monitor for more than a month.
Do not use rechargeable batteries for this type of monitor.
Measurement range and operating conditions
Cuff pressure 0 – 300 mmHg
Systole 60 – 260 mmHg
Diastole 40 – 199 mmHg
Heart rate 40 – 180 beats per minute
Pressure measurement accuracy ± 3 mmHg
Pulse measurement accuracy ± 5%
Operating temperature 10°C ~ 40°C
Operating humidity ≤ 85% RH
The battery lasts for approximately 100 measurements
Package contents
1 Start BPa arm blood pressure monitor
User manual
1 carrying case
4 AAA batteries
