Description
Teltonika RUTX12 Rugged and powerful industrial LTE router designed for LTE/GNSS and WLAN technologies. It belongs to a group of compact, cost-effective and secure industrial IoT routers that guarantee high performance in environments with a wide range of operating temperatures. It is equipped with two SIM slots and four GbE ports, Dual-Band AC Wi-Fi, Bluetooth LE, LED indicators of digital inputs/outputs and status LEDs that show the level of the received signal from the mobile network. It is also equipped with two independent LTE modems for simultaneous and mutually redundant LTE connections. The integrated GPS receiver provides constant information about the router's position. This router is ideal for advanced industrial and enterprise applications. Advantages: Support for 4G (LTE) – Cat 6 (up to 300 Mbps) and 3G (up to 42 Mbps) Dual SIM with auto Failover, Backup WAN and other functions Wave-2 802.11ac Dual-Band Wi-Fi with speeds up to 867 Mbps + Bluetooth LE Remote access - Teltonika Remote Management System Quad-core ARM Cortex A7 CPU, 717 MHz Easy-to-use, secure RutOS operating system based on OpenWrt VPN service support Wide range of power supply voltages for easier integration Wireless part - Wireless mode: IEEE 802.11b/g/n/ac (Wi-Fi 5), Dual Band, MU-MIMO, transmission up to 867 Mbps, AP and Station - Encryption: WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation - ESSID (stealth mode) + wireless Hotspot - Bluetooth LE (for short-range communication) Mobile part - Module: 2x 4G (LTE) Cat 6 - up to 300 Mbps, 3G - up to 42 Mbps - 2x SIM slot (Mini SIM - 2FF) - Status: Signal strength (RSSI), SINR, RSRP, RSRQ, sent/received bytes, module in use - SMS notification Ethernet part - 1x WAN port 10/100/1000 Mb/s, can be configured to LAN (auto MDI/MDIX) - 4x LAN port 10/100/1000 Mb/s (auto MDI/MDIX) Network part - Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) - Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL) - VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers (enable correct routing of VoIP packets). - Connection monitoring: Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP - Firewall: defines rules for communication (port forwarding, forwarding rules, etc.) - DHCP: static and dynamic IP allocation - Network backup: backup for connection or power failure recovery (VRRP) - QoS: control by priority, source/destination, protocol or port - DDNS: support >25 service providers, others can be configured manually - Hotspot: internal/external Radius server, customizable landing page Security - Authentication: Pre-shared key, digital certificates, X.509 certificates - Firewall: Pre-defined firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T - Attack prevention: DDOS attack prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan protection (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) - VLAN: Port and VLAN tag separation - WEB filter: blacklist to block unwanted websites, whitelist to specify allowed websites - Access control: Flexible access control of TCP, UDP, ICMP packets, VPN MAC address filter - OpenVPN: support for multiple clients on the server, 12 encryption methods - OpenVPN encryption: DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC - IPsec: IKEv1 and IKEv2 with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) - GRE: GRE tunnel (general encapsulation protocol) - PPTP, L2TP: client/server services can be run simultaneously - Stunnel (planned): Encrypted network tunnel, mainly for programs that do not support SSL. Allows two networks to be connected via an encrypted TCP tunnel, or to secure the operation of unencrypted protocols or daemons such as IMAP, MySQL, POP, IRC and others. Adds TLS encryption functionality to existing clients/servers without any code changes. - DMVPN: Creating scalable IPsec VPN MODBUS networks - Modbus TCP slave: ID range 0-255 or remote access via WAN - Modbus TCP master: support for functions 01, 02, 03, 04, 05, 06, 15, 16, support for 8/16/32-bit data formats - MQTT gateway: the gateway allows sending commands and receiving data from the Modbus Master via the MQTT broker - Modbus data/server: protocols HTTP(S), MQTT, Azure MQTT (planned) Firmware customization - Operating system: RutOS (OpenWrt based Linux OS) - Supported programming languages: Busybox shell, Lua, C, C++ - Development tools: SDK package (with development environment) GNSS - GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS - Coordinates: GNSS coordinates via WebUI, SMS, TAVL, RMS Power supply - 4pin DC, 9–50 V - passive PoE, not compatible with 802.3af/at - power consumption less than 22 W For more detailed information, see the enclosed manual, the documents tab or the page wiki.teltonika-networks.com/view/RUTX12. The RMS system can be tested for free at https://rms.teltonika.lt/. BASIC SPECIFICATIONS Processor: ARM Cortex A7, 717 MHz, 4-core Memory: 256 MB DDR3 + 256 MB SPI Flash Ports: 5x RJ-45, 1x USB 2.0, 1x digital input, 1x digital output (on power connector), 2x SIM slot (Mini SIM - 2FF), 4x SMA (LTE), 1x SMA (GNNS), 2x RP-SMA (Wi-Fi), 1x RP-SMA (Bluetooth) PoE support: yes, passive Power supply: 9-50 V Dimensions: 132 x 95 x 44 mm
