ASUS ROG STRIX X870-I GAMING WIFI
The board is equipped with graphics outputs for use with processors with integrated graphics core. The motherboard does not include a graphics card and without the use of a corresponding processor, these outputs will be inoperative.
CPU
Support for AMD Ryzen 9000, 8000 and 7000 series processors (AM5 socket)
Chipset
AMD X870
Memory
2× DDR5 memory slots, support up to 96 GB
Supports up to 8400+ MT/s (OC) with Ryzen 9000 series processors
Supports up to 8600+ MT/s (OC) with Ryzen 8000 series processors
Supports up to 8000+ MT/s (OC) with Ryzen 7000 series processors
ECC and non-ECC support, unbuffered
Dual-channel memory architecture
Support On-Die ECC function
Support for AMD Extended Profiles for Overclocking (EXPO)
ASUS Enhanced Memory Profile (AEMP) support
Slots
AMD Ryzen 9000 and 7000 series
1× PCIe 5.0 x16 slot
AMD Ryzen 8000 series
1× PCIe 4.0 x16 slot (supports x8/x4 mode)
Graphic arts
1× HDMI port, supporting max. resolution 4K at 60 Hz (according to HDMI 2.1)
2× USB4, supporting max. resolution 4K at 60 Hz (according to DP 1.4a)
Storage
AMD Ryzen 9000 and 7000 series
1× M.2 slot, M Key, for type 2280 units (PCIe 5.0 x4 mode)
AMD Ryzen 8000 series
1× M.2 slot, M Key, for 2280 type units (PCIe 4.0 x4 mode)
AMD X870 chipset
1× M.2 slot, M Key, for 2242/2260/2280 type units (PCIe 4.0 x4 mode)
2× SATA III
AMD RAIDXpert2 supports RAID 0 and RAID 1 for SATA drives and RAID 0, RAID 1, and RAID 10 for PCIe drives
USB
2× USB4 (USB-C) ports available on the rear panel
2× USB-C 3.2 Gen2 (USB-C 3.1) (1 port available on the back panel, 1 port available via internal USB connector)
4× USB 3.2 Gen2 (USB 3.1) available on the back panel
1× USB 3.2 Gen1 (USB 3.0) port available via internal USB connector (supports 2× USB 3.2 Gen1)
3× USB 2.0 ports on the rear panel
1× USB 3.2 Gen2 (USB 3.1) port (when connecting ROG STRIX HIVE II)
1× USB-C 3.2 Gen2 (USB-C 3.1) port (when connecting ROG STRIX HIVE II)
2× USB 2.0 (supports 3× USB 2.0 when ROG FPS CARD is connected)
Audio
2x audio jack after connecting ROG Strix Hive II
ROG Hyper-Grounding technology
ESS SABRE9260Q DAC
HIND
1× Intel 2.5GbE LAN controller
ASUS LANGuard
WLAN/Bluetooth
2×2 Wi-Fi 7 (802.11be)
Triple Band (2.4 GHz, 5 GHz, 6 GHz)
Bluetooth v5.4
Internal connectors
1× 24pin ATX main power connector
1× 8pin +12V power connector
1× 4pin CPU fan connector
1× 4pin water cooling pump connector
1× 4pin chassis fan connector
2× M.2 slots
2× SATA III
1× USB-C 3.2 Gen2 (USB-C 3.1)
1× USB 3.2 Gen1 (USB 3.0) connector (supports 2× USB 3.2 Gen1)
2x USB 2.0 port (supports 3x USB 2.0)
1× CPU overvoltage jumper
1× front panel connector
1× PCIe alternate mode switch
2x addressable Gen2 connector
1× 2pin power button connector
1× thermal sensor connector
2x USB-C for ROG FPS card installation
Rear panel ports
2× Wi-Fi antenna connector
1× HDMI
2× USB4 (USB-C)
1× USB-C 3.2 Gen2 (USB 3.1)
4× USB 3.2 Gen2 (USB 3.1)
3× USB 2.0
1× RJ-45
1× BIOS Flashback button
1× Clear CMOS button
Dimensions
17 × 17 cm
mini-ITX format
