HPE X130 10G SFP+ LC SR Transceiver

Professional 10-gigabit SFP+ transceiver designed for short distances in data centers and enterprise networks.

This HPE X130 10G SFP+ LC SR transceiver, model number JD092B, is a reliable solution for high-speed network connectivity. It uses an 850nm wavelength and is optimized for multimode fiber , enabling data transfer rates of up to 10.31 Gbps over distances of up to 300 meters .

The transceiver is fully compatible with HPE Comware-based devices and supports hot-pluggable installation , allowing hot-swap without having to power down the network device. The integrated DDM (Digital Diagnostic Monitoring) function provides continuous monitoring of operating parameters.

Compatibility with various fiber types
The transceiver supports various types of multimode fibers including OM1 (62.5/125 µm) with a range of 33 m, OM2 (50/125 µm) with a range of 82 m and OM3 (50/125 µm) with a maximum range of 300 m at a modal bandwidth of 2000 MHz×km.

Digital diagnostic monitoring
The integrated DDM function provides real-time information on operating parameters including transmitter and receiver optical power, temperature, supply voltage and bias current, which facilitates maintenance and troubleshooting.

Broad compatibility with HPE switches
The transceiver is certified for use with a full range of HPE FlexFabric switches including the 12900, 11900, 10500, 7900, 7500, 5980, 5950, 5940, 5930, 5920 series and other Comware-based devices.

BASIC SPECIFICATIONS

Model: HPE X130 10G SFP+ LC SR Transceiver

Part number: JD092B

Transfer rate: 10.31 Gbps

Wavelength: 850nm

Fiber type: multimode (MMF)

Connector: LC duplex

Maximum range: 300 m (OM3), 82 m (OM2), 33 m (OM1)

Transmit power: –7.3 to –1 dBm

Receiver sensitivity: –9.9 to +0.5 dBm

DDM support: yes

Operating temperature: 0 to +70 °C