MikroTik RouterBOARD RB450Gx4, 1 GB RAM, IPQ-4019 (716 MHz), 5x GbE, 802.3af/at, L5 license

MikroTik RB450Gx4 Powerful successor to the RB450G minirouter. Compared to the previous model, it is equipped with a powerful 4-core IPQ-4019 processor with a frequency of 716 MHz, the memory has been expanded to 1 GB RAM and support for the 802.3af/at PoE standard has been added. RouterBoard is intended primarily as a Firewall and VPN tunneling for small and medium-sized companies with an Internet connection up to 500 Mbps. Ethernet router, 5× gigabit ports, 1× RS-232, 1× microSD slot, 2× DC jack (10–57 V) Supplied without a cover. The design of the device is identical to the previous RB850 and RB450 series. The device supports IPsec hardware encryption. It supports passive (8–30 V DC) and active PoE power supply (802.3af/at) on the 1st port. Port no. 5 can be used as a passive PoE output up to 57 V (max. 500 mA). Information on the RouterOS MikroTik system If you are starting with RouterOS MikroTik or if you need advice on more complex settings, you can use our support. You can learn how to set up and manage the RouterBoard at our trainings. Setup tips and frequently asked questions can be found in the Technical Support section. All RouterBoards have the same RouterOS MikroTik system. All devices with RouterOS MikroTik fully support IPv6, have a firewall, Queues, NAT and with an L4 license support the CAPsMAN server. MikroTik can be set up via a web interface, via a mobile application, or with the winbox program, which can be downloaded from mikrotik.com. MikroTik has a "Quick Set" option, i.e. a quick setup option. There are several preset profiles to choose from. BASIC SPECIFICATIONS Ports: 5× GbE RJ-45 Ethernet, 1× RS-232 (DB9), 1× microSD slot Processor: Qualcomm IPQ-4019 ARM (716 MHz), 4-core Memory: 1 GB RAM, 2 MB Flash, 512 MB NAND storage PoE: yes, active 802.3af/at (input), passive input 8–30 V DC, passive output on the 5th port (up to 57 V) Power supply: 10–57 V (2× DC jack) or 12–57 V (PoE-in) Operating system: RouterOS (Level 5) Useful links and videos: Declaration of conformity + user manual Device setup via Quick Set quick guide Mobile phone control application Device reset, reset button function RouterOS MikroTik system recovery via Netinstall utility Address translation (NAT) setup Load Balancing setup (traffic distribution between multiple internet connections) Failover settings (switching the line to the backup in case of an outage) Multiple uplinks using PCC & Load balancing Static NAT & RouterOS MikroTips: Netinstall