MikroTik RouterBOARD RB5009UPr+S+IN, 4x 1.4 GHz, 7x GbE PoE+, 1x 2.5 GbE PoE+, USB 3.0, SFP+, L5

MikroTik RB5009UPr+S+IN Compact and powerful RouterBoard with redundant power supply (DC jack, 2pin and PoE) for demanding users. The router is equipped with a 4-core Marvell Armada ARMv8 (88F7040) Amethyst CPU (1.4 GHz), 1 GB DDR4 RAM, 1 GB NAND memory, seven GbE ports, one 2.5G port and a 10G SFP+ slot. The RouterBoard supports active PoE+ power supply 802.3af/at (24-57 V) on all 8 ports (input/output). The processor and the switching chip are located on the bottom of the board - so the metal cover acts as a passive heat sink. Thanks to its compact dimensions, 4 of these routers can be mounted in one 1U slot (Rackmount kit K-79, separate product). 3 power supply methods (8x PoE+ 802.3af/at, DC jack, 2pin terminal block) - up to 10 power supplies 8x PoE+ input & output Double the performance compared to products in the same category 7x GbE port, 1x 2.5G port, 1x 10G SFP+ slot, 1x USB 3.0 RouterOS v7 operating system (license level - L5) Created based on user feedback Effective cooling - the entire cover acts as a heat sink Possibility to mount up to 4 routers in one 19" 1U slot Information about the MikroTik RouterOS system If you are starting out with MikroTik RouterOS or need advice on a more complex setup, you can use our support. You can learn how to set up and manage the RouterBoard at our training courses. Don't know which model to choose? Check out this comparison table, where you will also find other information to help you make your choice. All RouterBoards have the same MikroTik RouterOS system. All devices with RouterOS MikroTik fully supports IPv6, has a firewall, Queues, NAT and with an L4 license supports CAPsMAN server. MikroTik can be configured via a web interface, via a mobile application, or with the winbox program, which can be downloaded from mikrotik.com. MikroTik has a "Quick Set" option, i.e. a quick setup option. There are several preset profiles to choose from. BASIC SPECIFICATIONS Ports: 7x GbE RJ-45 port, 1x 2.5G RJ-45 port, 1x 10G SFP+ slot, 1x USB 3.0 type A Processor: Marvell Armada ARMv8 Amethyst (1.4 GHz, 4-core, model 88F7040) Memory size: 1 GB DDR4 RAM + 1 GB NAND Operating system: RouterOS v7 L5 Power supply: PoE+ 802.3af/at, DC jack, 2pin terminal block Maximum consumption: 150 W (15 W without PoE) Dimensions: 220 x 125 x 22 mm The MikroTik RB5009UPr+S+IN router was tested on the HWcooling.net server. You can find the review here. Useful links and videos: Declaration of conformity + user manual Device setup via Quick Set quick guide Mobile phone control application Device reset, reset button function MikroTik RouterOS system recovery via Netinstall utility Address translation (NAT) setup Load Balancing setup (distribution of traffic between multiple Internet connections) Failover setup (switching the link to the backup in case of an outage) Multiple uplinks using PCC & Load balancing Static NAT & RouterOS MikroTips: Netinstall