Reference: NASSYN1166
Brand: SYNOLOGY
Reference: NASSYN1166
Brand: SYNOLOGY
Reference: 115760111
Brand: Avast Software s.r.o.
Reference: PCD4189
Brand: DELL
Reference: 65327
Reference: CSCL2000
Brand: COLORWAY
Banner
Business terms and conditions
Delivery policy
Return policy
Your message was successfully sent.
There was a problem with sending your message, please contact us via contact page.
Victron CAN-bus temperature sensor
The CAN-Bus temperature sensor is an accessory developed specifically for all models of DC-DC buck-boost converters. The temperature is transmitted to the DC-DC buck-boost converter via a communication cable via the CAN bus communication ports. The CAN.bus temperature sensor can also be used in combination with any Victron Multi or Quattro . This allows the charging voltage to be regulated in accordance with low temperatures. For LiFePO4 lithium systems, this sensor is essential in many system applications as LiFePO4 batteries must not be charged if they are too cold. Charging lithium batteries at or near freezing point will cause permanent damage to the cells.
BASIC SPECIFICATIONS
Supply voltage: DC 4.36V
Power consumption: 60 mA
I/O interface: 1× alarm output (5pin), 350 mA
Dimensions: 57.6 × 40 × 15.8 mm
Weight: 12g
| LED color | LED indication | Status indication |
|---|---|---|
| Green | Green for 1 second, then red | Start of operation |
| The green LED flashes once every 4 seconds | The temperature is higher than the set threshold value. | |
| Green LED flashes 3 times | The temperature sensor on the CAN-bus has received a new threshold value from 800/1600 | |
| Red / green | Short red flash followed by 3 green flashes | CAN bus connection |
| Red | Long red flash (1 second) | Standalone mode, without CAN bus connection |
| The red LED flashes 3x in 4 seconds | CAN-bus temperature sensor (still) does not have a valid threshold value | |
| The red LED lights up for 1 second. | The temperature has reached the set threshold (alarm, active status) | |
| The red LED flashes once every 4 seconds | The temperature has reached the set threshold value. |
CAN-bus temperature sensor with Quattro or MultiPlus and Victron Lithium BMS battery. Control of MultiPlus charging current if temperature is too low.

CAN-bus temperature sensor with buck-boost converter and Victron Lithium BMS battery The buck-boost converter charges the voltage regulator if the temperature is too low.

Data sheet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Our pricing is always guided by the principles of a fair price. We do not artificially move prices or brag about inflated percentages. You can always find price history for each product.
check_circle
check_circle
Agartha Company s.r.o., operator of the daycomp wholesale e-shop, hereby informs its customers about the opening hours during the Christmas ...
We have recently introduced a modernized method of electronic delivery of selected consumer licenses to our offer, which brings faster and m ...