XtendLan S/FTP Cat 6A 15 m gray; Patch cable of category Cat 6A with two RJ-45 connectors, for connecting network devices. The cable length is 15 m. BASIC SPECIFICATIONS; Category: Cat 6A...
Ubiquiti TC-CON; Shielded RJ-45 8p8c connector. For wire, round cable. Without insert. The highest supported protocol is 1000BASE-T. The contacts are covered with 50 µm gold. BASIC SPECIFICATIONS;...
Dell hard drive swivel pocket with cable and screw, designed for Dell Pro Slim/Slim Plus and Pro Max Slim Desktop computers. Tested and approved by Dell for full compatibility.
Synology Disk Tray (Type D9); Original frame with lock for 2.5"/3.5" hard drives in selected NAS network storage devices. BASIC SPECIFICATIONS; For drives: 2.5"/3.5" HDD/SSD;...
CPU Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4.
Dual Socket LGA-2011-3 (Socket R3) supported, CPU TDP support Up to 160W TDP, 1 QPI up to 9.6GT/s
Cores / Cache Up to 22 cores † / Up to 55MB† cache
Note † BIOS version 2.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support.
System Memory
Memory Capacity 1TB 3DS ECC/non-ECC RDIMM, DDR4-2400MHzUp to 2TB 3DS ECC LRDIMM, DDR4-2400MHz, in 16 DIMM slots
Memory Type 2400?/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
BIOS Features Plug and Play (PnP)
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
SMBIOS 2.7.1
UEFI 2.3.1
Management
Software NMI, SuperDoctor® 5, Watchdog
Power Configurations ACPI Power Management
Power-on mode for AC power recovery
PC Health Monitoring
Voltage +12V, +3.3V, +5V, +5V standby, 3.3V standby, 6 Phase-switching voltage regulator
FAN 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Pulse Width Modulated (PWM) fan connectors, Status monitoring for speed control
Temperature CPU thermal trip support, Monitoring for CPU and chassis environment, Thermal Monitor 2 (TM2) support, PECI, Thermal Control for 8 Fan Connectors
LED CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
Other Features Chassis intrusion detection, Chassis intrusion header, RoHS, SDDC
Operating Environment
Operating Temperature Range 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range 10% ~ 95% (non-condensing)
Are you sure that you want to report this comment?
Report sent
Your report has been submitted and will be considered by a moderator.
Your report cannot be sent
Write your review
Review sent
Your comment has been added!
Your review cannot be sent
Price history
Our pricing is always guided by the principles of a fair price. We do not artificially move prices or brag about inflated percentages. You can always find price history for each product.
