MikroTik RouterBOARD RB4011iGS+5HacQ2HnD, 4x 1.4 GHz, 10x Gigabit LAN, SFP+, 2.4, 5 GHz, 802.11ac, 4x4 MIMO L5

MikroTik RB4011iGS+5HacQ2HnD RouterBoard RB4011iGS+5HacQ2HnD-IN with a 4-core Annapurna Labs AL21400 processor at a frequency of 1.4 GHz, integrated hardware acceleration, dual band Wi-Fi (2.4 and 5 GHz) with 4x4 MIMO support and ten LAN ports with gigabit speed and the possibility of expanding with a 10 Gbps module via the SFP+ port. The RouterBoard is ideal for small and large businesses, homes and offices. It can route up to 2.5 Gbps, thanks to the integrated accelerator it has a throughput of up to 2 Gbps in a tunnel with robust AES-256-CBC + SHA256 encryption and in switch mode it can transfer data at speeds of up to 9.7 Gbit. It is therefore ideal in combination with a 10 Gbps miniGBIC module, which can be used to expand the RouterBoard within the integrated SFP+ port. The RouterBoard has a miniPCI-e slot in which a 2.4 GHz card is inserted. This can be replaced with another one, e.g. another 5 GHz card. A big advantage is the support for the 802.11ac standard, which together with 4x4 MIMO technology enables wireless transmission at speeds of up to 1733 Mbps. It also supports the 2.4 GHz band with speeds of up to 300 Mbps. The RouterBoard has external (hard-wired) 3 dBi antennas (4x 5 GHz, 2x dual band 2.4 GHz) and an output power of up to 33 dBm. The RouterBoard has a passive PoE input on the first port (eth1) in the range of 18-57 V. On port 10 (eth10) it has a PoE output, which has the same voltage as the PoE input. RB4011iGS+5HacQ2HnD-IN is an ideal model for: - Ingress and egress firewall - VPN concentrator - CAPsMAN server - Advanced NAT - Home AP with 2.4 and 5 GHz radio and support for transfer speeds up to 1733 Mbps - Client/server tunnels L2TP, IPsec, OpenVPN, PPTP, STTP, PPPoE, EoIP and many others - Simple and advanced speed limits via Queues and service prioritization - Dynamic routing BGP, OSPF, RIP, MPLS and others - 1/10 Gbps optical path termination - Switching and bridging - IPv6 network Information about the MikroTik RouterOS system If you are starting out with MikroTik RouterOS or need advice on more complex settings, you can use our support. You can learn how to set up and manage RouterBoard at our training courses. Don't know which model to choose? Check out this comparison table, where you will also find other information that will help you make your choice. All RouterBoards have the same RouterOS MikroTik system. All devices with RouterOS MikroTik fully support IPv6, have a firewall, Queues, NAT and with an L4 license support the CAPsMAN server. MikroTik can be configured via a web interface, via a mobile application, or with the winbox program, which can be downloaded from mikrotik.com. MikroTik has a "Quick Set" option, i.e. a quick setup option. There are several preset profiles to choose from. BASIC SPECIFICATIONS CPU: Annapurna Labs AL21400 (4-core, 1.4 GHz) RAM: 1 GB Ports: 10x Gigabit RJ-45 LAN, 1x SFP+, 1x RJ45 (console) PoE support: yes Standard: IEEE 802.11a/b/g/n/ac Frequency band: 2.4 GHz / 5 GHz Antenna: external 4x 3 dBi Security: AES-128/256-CBC + SHA1/256, AES-128-GCM Dimensions: 228 x 120 x 30 mm Useful links and videos: Declaration of conformity + user manual Device setup via Quick Set quick guide Mobile phone control application Device reset, reset button function MikroTik RouterOS system recovery via Netinstall utility Address translation (NAT) setup Load Balancing setup (distribution of traffic between multiple Internet connections) Failover setup (switching the line to the backup in case of an outage) Multiple uplinks using PCC & Load balancing Static NAT & RouterOS MikroTips: Netinstall