XtendLan G.fast/VDSL CPE slave modem/router, G.fast 106/212, VDSL 17a/35b
Slave CPE modem or router for implementing the end connection on a G.fast or VDSL line. On lines hundreds of meters long, transmission speed up to 1Gb/s symmetrically depending on the selected mode and line quality.
Configuration via web interface with HTTPS support, choice between bridge and router modes with NAT, support for IGMP multicast, DHCP server, DNS Proxy, QoS prioritization (DSCP). It has surge protection on the line interface and LED indication.
The device is suitable for operation in the CETIN network (O 2 , etc.) in conjunction with VDSL and the V35b profile at full speed and stability.
BASIC SPECIFICATIONS
Ports: 4x RJ-45 10/100/1000 Mbps, 1x RJ-11 (Terminal block combo), 1x RJ-11 (POTS/ISDN), 2x USB3.0
Maximum frame length: JumboFrame 1600 B
Ethernet compliance: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
G.fast standards: ITU-T G.9700/9701, profiles 106a/b + 212a/b, Super Vectoring support
VDSL standards: ITU-T G993.2/G998.4, profiles 17a + 35b, Vectoring and Super Vectoring support
Power supply: from external adapter, DC 12V/ 2A; power consumption <10W
Operating temperature: 0 to 50°C, humidity <90%
Dimensions: 196 x 146 x 40 mm
Weight: 400g
Features:
- Intel chipset
- Support for both fixed and dynamically assigned external IP addresses
- Static IPv4 routing
- IPv6 forwarding
- DHCP server, relay and client
- IGMP Multicast and Snooping
- DNS Proxy and Relay
- DDNS registration support
- Support for QoS prioritization according to DSCP
Table of measured values from actual installation
Example of a P2P application
Example of VDSL and internet connection
Example of CCTV application
Manual
Datasheet
