SUPERMICRO MB 1x Socket C32 Opteron 4100, 4x DIMM DDR3, 6xSATA, PCI-E, IPMI

Product SKUs

MBD-H8SCM-F ##H8SCM-F (Standard Retail Pack)



Physical Stats

Form Factor ##Micro ATX Form

Dimensions ##9.6" x 8.6" (24.4cm x 21.8cm)



Processor/Chipset

CPU ##Single 1207-pin Socket C32
##Supports one 8/6/4-Core ready AMD Opteron™ 4000 Series processors

Chipset ##AMD chipset SR5650/SP5100



System Memory

Memory Capacity ##Four DIMM sockets
##Supports up to 128GB Registered ECC or 32GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 4 DIMMs
##Dual channel memory bus
##See Detailed Memory Support Matrix

Memory Type ##DDR3 1600/1333/1066 MHz Registered ECC SDRAM or Unbuffered ECC/non-ECC 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes ##1GB, 2GB, 4GB, 8GB, 16GB, 32GB

Memory Voltage ##1.35V or 1.5V



On-Board Devices

SATA ##AMD SP5100 (RAID 0, 1, 10)

IPMI ##Support for Intelligent Platform Management Interface v.2.0
##IPMI 2.0 with virtual media over LAN and KVM over LAN support
##Winbond® WPCM450 BMC

Network Controllers ##Two Intel® 82574L controllers
Two single-port Gigabit Ethernet
##10/100/1000BASE-T support

VGA ##Matrox G200eW 16MB DDR2

Super I/O ##Winbond® W83527HG chip



Input / Output

SATA ##6x SATA (3Gb/s) Ports

LAN ##2 RJ45 LAN ports
##1 RJ45 Dedicated LAN supports IPMI

USB ##7x USB 2.0 ports
##2x Rear, 2x header (4 ports), 1x Type A

VGA ##1x VGA port

Keyboard / Mouse ##PS/2 keyboard and mouse ports

Serial Ports ##2x Fast UART 16550 serial port
(one header & one port)

Others ##1 SATA DOM power connector, TPM header



Expansion Slots

PCI-E/PCI ##1 PCI-E 2.0 x8 (in x16 slot)
##1 PCI-E 2.0 x8
##1 PCI-E 2.0 x4 (in x8 slot)
##1 PCI

IPMI ##IPMI 2.0 expansion slot



Chassis ( Optimized for H8SCM-F )

1U Chassis ## CSE-113MTQ-563CB

1U ##SC512, SC513, SC811, SC813M,
SC111, SC113M

Mid-Tower ##SC731, SC733



System BIOS

BIOS Type ##16Mb SPI Flash ROM with AMI® BIOS

BIOS Features ##Plug and Play (PnP)
##DMI 2.3
##PCI 2.2
##ACPI 2.0
##USB Keyboard Support
##SMBIOS 2.3



Management

Software ##IPMI (Intelligent Platform Management Interface) 2.0
##Super Doctor III

Power Configurations ##ACPI Power Management
##Wake-On-LAN (WOL) header
##Keyboard Wakeup from Soft-Off
##Power-on mode control for AC power loss recovery



PC Health Monitoring

CPU ##Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, HT, memory, chipset
##CPU switching voltage regulator

FAN ##Up to 5-fan status tachometer monitoring
##Up to five 4-pin fan headers
##Status monitor for speed control
##3-pin fan support (w/o speed control)
##Low noise fan speed control
(4-pin fan only)
##Pulse Width Modulated (PWM) fan connectors

Temperature ##Monitoring for CPU and chassis environment
##CPU Thermal Trip Support
##Thermal control for 8x Fan connectors
##I2C Temperature Sensing Logic

LED ##CPU / System Overheat LED
##+5V Standby Alert LED

Other Features ##Chassis Intrusion Detection
##Chassis Intrusion Header



Operating Environment / Compliance

RoHS

RoHS 6/6 ##RoHS Compliant 6/6, Pb Free

Environmental Specifications ##Operating Temperature:
10°C to 35°C (50°F to 95°F)
##Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
##Operating Relative Humidity:
8% to 90% (non-condensing)
##Non-operating Relative Humidity:
5% to 95% (non-condensing)



OS Compatibility

• Please see our OS Compatibility Chart


Regulatory

FCC ##Passed to meet FCC standard requirement