SUPERMICRO FlexATX MB Xeon D-1518 (4-core), 4x DDR4 ECC DIMM,6xSATA,16xSAS3,2x PCI-E 3.0 x8, 2x10Gb SFP+ LAN,IPMI

Product SKUs

MBD-X10SDV-4C-7TP4F X10SDV-4C-7TP4F



Physical Stats

Form Factor Flex ATX

Dimensions 9.0" x 7,25" (22.86cm x 17.78cm)



Processor/Cache

CPU Intel® Xeon® Processor D-1518.
Socket FCBGA1667 supported, CPU TDP support 35W

Cores / Cache 4 cores, 8 threads / 6MB cache



System Memory

Memory Capacity Up to 128GB Registered ECC RDIMM, DDR4-2133MHz
Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots

Memory Type 2133/1866/1600MHz ECC DDR4 ECC RDIMM and ECC/Non-ECC UDIMM

DIMM Sizes 4GB, 8GB, 16GB, 32GB

Memory Voltage 1.2V

Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)



On-Board Devices

Chipset System on Chip

SATA SoC controller for 4 SATA3 (6 Gbps) ports; RAID 0,1,5,10
Broadcom 2116 SW controller for 16 SATA3 (6Gbps) ports; SAS2 and SATA3

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Network Controllers Dual LAN with 10G SFP+ from D-1500 SoC
Dual LAN with 1GbE with Intel® I210

Graphics Aspeed AST2400 BMC



Input / Output

SATA 4 SATA3 (6Gbps) port

LAN 2 10G SFP+ LAN ports
2 1GbE LAN ports
1 RJ45 Dedicated IPMI LAN port

USB 5 USB 2.0 ports (4 headers, 1 Type A)
2 USB 3.0 ports (2 rear)

Video Output 1 VGA port

Serial Port / Header 1 COM Port (1 header)


TPM TPM Header







Expansion Slots

PCI-E 2 PCI-E 3.0 x8
Interface: PCI-E 2.0 x1
Mini-PCI-E with mSATA support

M.2 M.2 Interface: 1 SATA/PCI-E 3.0 x4
Form Factor: 2242, 2280, 22110
Key: M-Key



System BIOS

BIOS Type 128Mb SPI Flash with AMI BIOS

BIOS Features PCI 3.0
ACPI 5.0
USB Keyboard support
RTC (Real Time Clock) Wakeup
SMBIOS 2.8
UEFI 2.4



Management

Software Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SUM, SuperDoctor® 5, Watchdog

Power Configurations ACPI Power Management
+12V DC Power Input
Control of power-on for recovery from AC power loss
CPU thermal trip support for processor protection
M.2 NGFF connector, Node Manager Support, SDDC, System level control, UID, WOL
ATX Power connector



PC Health Monitoring

Voltage +12V, +3.3V, +5V, 1.2V (VDIMM), 6 -fan status, Chassis intrusion header, System level control, VBAT

FAN 6x 4-pin fan headers (up to 6 fans), 4 fans with tachometer monitoring, Dual Cooling Zone, Low noise fan speed control, Pulse Width Modulated (PWM) fan connectors, Status monitoring for on/off control, Status monitoring for speed control

Temperature Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI

LED CPU / System Overheat LED

Other Features 12V DC or ATX Power Source, Chassis intrusion detection, Chassis intrusion header, RoHS



Operating Environment

Operating Temperature Range 0°C ~ 60°C (32°F ~ 140°F)

Non-Operating Temperature Range -40°C - 85°C (-40°F - 185°F)

Operating Relative Humidity Range 10% ~ 85% (non-condensing)

Non-Operating Relative Humidity Range 10% ~ 95% (non-condensing)