SUPERMICRO MB 1x Epyc 3251 SoC (8C/16T), active, 4x DDR4, 4xSATA3, 1xM.2 (2280), PCIe 3.0 x16, IPMI, 4x LAN (i350-AM4)

Product SKUs

MBD-M11SDV-8C-LN4F M11SDV-8C-LN4F



Physical Stats

Form Factor Mini-ITX

Dimensions 6.7" x 6.7" (17cm x 17cm)



Processor/Cache

CPU Single AMD EPYC™ 3251 SoC Processor

Cores 8 Core/16 Thread


Chipset System on Chip



System Memory

Memory Capacity 4 DIMM slots
Supports up to 512GB Registered ECC DDR4 2666MHz SDRAM in 4 DIMMs
2-channel memory bus

Memory Type DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs

DIMM Sizes 8GB, 16GB, 32GB, 64GB, 128GB

Memory Voltage 1.2V

Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)



On-Board Devices

SATA SATA3 (6 Gbps)

Network Controllers 4x 1GbE with Intel® I350-AM4
1 Realtek RTL8211E PHY (dedicated IPMI)

IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC

VGA ASPEED AST2500 BMC



Input / Output

SATA 4 SATA3 (6 Gbps) ports

LAN 4 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port

USB 2 USB 3.0 ports
6 USB 2.0 ports

VGA 1 VGA port

Others 1 COM port header
1 TPM 2.0 header



Expansion Slots

PCI-Express 1 PCI-E 3.0 x16 slot


M.2 Interface: 1 PCI-E 3.0 x4
Form factor: 2280
Key: M-key







Chassis ( Optimized for M11SDV-8C-LN4F )

1U SCE300
SCE301




Server(s) ( with M11SDV-8C-LN4F )

Model(s) AS -5019D-FTN4
AS -E301-9D-8CN4


System BIOS

BIOS Type AMI 128Mb Flash EEPROM



Management

Software Super Doctor 5
Watch Dog
NMI
SUM
IPMI 2.0, KVM with dedicated LAN

Power Configurations ACPI Power Management
Power-on mode control for AC power loss recovery



PC Health Monitoring

CPU Monitors CPU Core Voltages, +1.8V, +3.3V, +12V
CPU switching voltage regulator
Supports system management utility
VBAT

FAN Up to 3 fan status tachometer monitoring
Up to 3 4-pin fan headers
Dual Cooling Zone
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors

Temperature Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 6x Fan connectors
I2C Temperature Sensing Logic

LED CPU / System Overheat LED

Other Features UID



Operating Environment / Compliance

Environmental Specifications Operating Temperature:
0°C to 60°C (32°F to 140°F)
Non-operating Temperature:
-40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity:
8% to 90% (non-condensing)
Non-operating Relative Humidity:
5% to 95% (non-condensing)