Emulex OneConnect OCe14102-NX Dual 10GbE SFP+ Direct Attached Twin-Ax Copper, PCI-E 3.0 x8

Controller

Emulex Engine™ (XE)100 series (Skyhawk™) of Ethernet Controllers

Ethernet Standards

Single IEEE 802.3-2012 40GBASE Ethernet port (40GBASE-SR4/40GBASE-CR4)
Single or Dual IEEE 802.3-2012 10GBASE Ethernet ports (10GBASE-SR/10GBASE-LR/10GBASE-CR)
Single or Dual 1GBaseX/SGMII auto negotiation
IEEE 802.1Q virtual LANs (VLAN)
IEEE 802.3-2012 Flow control with Pause frames
IEEE 802.1Qbg Edge Virtual Bridging
IEEE 802.1Qaz Enhanced Transmission Selection (ETS); Data Center Bridging Capability Exchange (DCBX)
IEEE 802.1Qbb Priority Flow Control (PFC)
IEEE 802.1AX Link Aggregation/LACP
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1Qau Congestion Notification

Ethernet Network Interface (Layer 2 NIC) and TCP/IP

NDIS 6.0, 6.2, 6.3-compliant Ethernet functionality
IPv4/IPv6 TCP, UDP checksum offload
IPv4/IPv6 Receive Side Scaling (RSS)
IPv4/IPv6 Large Receive Offload (LRO)
IPv4/IPv6 Large Send Offload (LSO)
Dynamic VMQ (Windows Server 2012 Hyper-V) and NetQueue (VMware vSphere) · Programmable MAC and VLAN addresses
128 MAC/VLAN addresses per port
Support for hash-based Multicast MAC address filters
Support for hash-based Broadcast frame filters per port
VLAN offloads (insertion and extraction)
Jumbo frame support up to 9000 Bytes

I/O Virtualization

Stateless L2, L3, and L4 offloads for frame-in-frame encapsulation (VXLAN, NVGRE)
PCI-SIG Address Translation Service (ATS) v1.0
Support for up to 512 hardware queues
Virtual Switch Port Mirroring for diagnostic purposes
Virtual Ethernet Bridging (VEB)
Virtual Ethernet Port Aggregator (VEPA)
Emulex Universal Multi-Channel (UMC), support for up to 16 PCIe physical functions (PFs) per adapter which can be used as partitions as follows:
OCe14401 Ethernet adapter, the port can support 16 NIC functions
OCe14101 or OCe14102 Ethernet adapters, each port can support eight NIC functions
OCe14104 Ethernet adapters, each port can support four NIC functions
Note: the system hardware must support and enable ARI and the host operating system must support ARI for maximum number of functions to be enabled; see Emulex UMC manual for more details
NIC SR-IOV
up to 63 virtual functions (VFs) per port
Quality of Service (QoS) for controlling and monitoring bandwidth assigned to and used by virtual entities
Configurable control of network bandwidth by physical port, queue or protocol
Traffic shaping and QoS across each VF and PF

Converged Enhanced Ethernet (CEE)
and Datacenter Bridging (DCB)

IEEE 802.1Qbb Priority Flow Control (PFC)
IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
IEEE 802.1Qaz Data Center Bridging Exchange (DCBX)
IEEE 802.1Qau Congestion Notification (QCN)
Absolute per-priority rate control option/configuration

Remote Direct Memory Access (RDMA)

Direct data placement in application buffers without CPU intervention
Supports IBTA RoCE specifications
Linux Open Fabrics Enterprise Distribution (OFED) support
Support for Linux Network File System (NFS) over
RoCE, iSCSI Extensions for RDMA (iSER)
Low latency queues for small packet sends and receives
Windows Server SMB Direct (SMB Direct over RDMA)



PCI Express (PCIe) Interface

PCIe 3.0 x8 (8, 5.0, and 2.5GTps per lane) compliant interface:
Up to 64Gbps full duplex bandwidth
Configurable width and speed to optimize power versus bandwidth
Support for up to 16 PCIe physical functions (PFs)
Support for x1, x2, x4 and x8 links widths
NIC Single Root I/O Virtualization (SR-IOV)
up to 63 virtual functions (VFs) per port
Message Signal Interrupts Extended (MSI-X)
Advanced Error Reporting (AER)
Completion Timeout (CTO)
Function Level Reset (FLR)
Alternative Routing ID Interpretation (ARI)

Comprehensive OS Support

Windows
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Oracle Linux
VMware vSphere
CentOS
Debian
Ubuntu
FreeBSD

Management, Boot Support

vCenter management plug-in support
Role-based management, integrated with Active Directory and LDAP
Multi-channel configuration and bandwidth control
UEFI and x86 remote boot support including PXE v2.1, UEFI 2.3.1
MAC statistics gathering (SNMP, Ethernet MIB, MIB2, RMON, RMON2)
Offline and online firmware updates
Integrated thermal sensor works with management utilities

Hardware Environments

x86, x64 servers

Interconnect

Copper

SFP+ Direct Attached Twin-Ax Copper interface
Standards compliant passive copper cables up to 5m and active copper cables up to 10m

Optical

Optic 10GBASE-SR short wave lasers with LC type connector supported up to 300m on laser optimized OM3 multimode fiber (MMF) cables
Optic 40GBASE-SR4 short wave lasers with MPO type connector supported up to 100m for OM3 and 150m for OM4 respectively on MMF cables
Optic 10GBASE-LR long wave lasers with LC type connector supported up to 10km single mode fiber (SMF) cable, Ethernet use only

Physical Dimensions

For single-port and dual-port adapters:
Short, low profile MD2 form factor card
167.64mm x 68.91mm (6.60” x 2.71”)
Standard, full height bracket installed
(low-profile bracket available)

Environmental Requirements

Operating temperature: 0° to 55°C (32° to 131°F)
Storage temperature: -40° to 70°C (-40° to 158°F)
Relative humidity: 5% to 95% non-condensing

Agency and product safety approvals

North America

FCC/Industry Canada Class A
UL/CSA Recognized
Class 1 Laser Product per DHHS 21CFR (J)

Europe

CE Mark
EU RoHS compliant
TUV Bauart Certified
Class 1 Laser Product per EN60825-1

Australia

C-Tick or RCM Mark

Japan

VCCI Class A

Taiwan

BSMI Class A

Korea

· MSIP (formally KCC/MIC) Class A

China

China RoHS Compliant